Home Page Image

    Installation :

    Open Box

    Install & Connect

    WIFI Setting

    Remote Control Setting

    Installation Video

    CONTACT US

 


 

Disclaimer:

TVpad Zone's sole purpose is to offer information on the TVpad and help users with questions that we may be able to answer.

TVpad Zone is not involved in any selling or service providing of the TVpad. Using our discount code (15819288) to buy the TVpad will provide us with a bit of commission, which will allow us to continue running the TVpad Zone website. We hope to be able to continue to provide the latest news, updates, and information about the TVpad to all users, and in the meantime we hope you will continue to support us by referring our coupon code to other interested buyers. Thank you for your support!


 
 

 

 

This is the new remote come with TVpad M121S:

The M121S remote can be set up to operate your TV in addition to the TVpad. After the set up, you can put away your original TV remote and control everything using just one control.

 

How to set up the remote:


1. Hold the "set" key on your TVpad remote for approximately three seconds. After the indicator light turn from a dim-ish light to a bright light, release the "set" key. The indicator light should turn on and stay red at this point.

2. Point your TV Remote towards the TVpad remote up close (approximately .5 to 5 cm apart). Hold the TVpad remote's "power" button until the TVpad remote's red indicator light begin to flash. At this time you can let go of the "power" button and press the "power" button on the original TV remote. When the indicator light on the TVpad remote flashes 3-5 times and then stays on again, it means it has succeeded.

3. Repeat step 2 to replace the "+" and "-" volume buttons, the channel "up" and "down" buttons, and other buttons within the TV section of the TVpad remote.

4. Press the "set" key on your TVpad remote again to confirm replacing the old TV remote's keys with the keys on your TVpad remote. Afterwards the red indicator light should disappear, meaning the set-up is done and you can begin operating your TV with the TVpad remote.